5E Product Walkthrough Playlist
Page 73 of 76 First ... 23637172737475 ... Last
  1. #721

    I'm having troubles connecting

    Hi, I have been trying to make it work but it keeps failing to connect, and I need help.

    1. Your LAN IP Address
    192.168.0.1

    2. The first two sets (octects) of your WAN IP as displayed by Fantasy Grounds and as displayed by your Router
    155.4.128.128

    3. Whether you are using Wired or Wireless (and not both)
    Wired

    4. Confirmation that you have set your Adapter in Network and Sharing Centre to Private
    Yes, see zip file

    5. Confirmation of what AV you are running and whether you have set any exceptions
    I'm using ESET and it handels windows firewall, but I have made rules in both for FG.


    6. Post the results of the tracert 8.8.8.8 command (if you have security concerns you can remove this bit once its been responded to)


    Tracing route to dns.google [8.8.8.8]
    over a maximum of 30 hops:

    1 <1 ms <1 ms <1 ms 192.168.0.1
    2 1 ms 1 ms <1 ms h-81-170-223-170.NA.cust.bahnhof.se [81.170.223.
    170]
    3 2 ms 1 ms 1 ms a785-itux-shg2-gw.bahnhof.net [46.59.118.64]
    4 1 ms 1 ms 1 ms h-158-174-156-190.NA.cust.bahnhof.se [158.174.15
    6.190]
    5 1 ms 1 ms 1 ms h-158-174-156-158.NA.cust.bahnhof.se [158.174.15
    6.158]
    6 2 ms 12 ms 12 ms gbg-cr3.gbg-cr4.bahnhof.net [176.10.181.174]
    7 12 ms 12 ms 12 ms gbg-cr4.sto-cr2.bahnhof.net [46.59.112.130]
    8 13 ms 12 ms 12 ms sto-cr2.sto-cr1.bahnhof.net [46.59.112.95]
    9 13 ms 12 ms 12 ms sto-cr1.sto-ixa-er1.bahnhof.net [46.59.112.81]
    10 12 ms 12 ms 12 ms 72.14.211.124
    11 24 ms 14 ms 14 ms 74.125.252.115
    12 12 ms 12 ms 12 ms 142.251.48.43
    13 13 ms 13 ms 12 ms dns.google [8.8.8.8]

    Trace complete.


    7. Confirmation as to what you have setup in your Router if changes have been made
    See Zip file

    8. Confirmation you do or do not have any Virtualisation NICs
    See Zip file. One is disabled

    Pics.zip

  2. #722
    damned's Avatar
    Join Date
    Mar 2011
    Location
    Australia
    Posts
    26,649
    Blog Entries
    1
    Hi ironwill6132

    Im pretty sure your ISP is doing some CGNat. We shall dive in and find out.

    In image 5 -you do not need to specify the remote port and you do not need outbound rules. You only shoudl be configuring Inbound rules and allowing traffic Inbound to TCP1802.

    in Image 7 the protocol should be TCP but choosing both wont stop it from working.

    What we need is an image of the TPLink routers status or similar page that shows its WAN ip address.

  3. #723
    Thanks for awnsering
    I removed the outbound rule from WFW I don't know if the "Router Status" pic is what your requesting.

    Pics.zip

  4. #724
    damned's Avatar
    Join Date
    Mar 2011
    Location
    Australia
    Posts
    26,649
    Blog Entries
    1
    Hi ironwill6132

    Fantasy Grounds sees your WAN IP as 155.4.128.128
    Your Router is showing it as 100.65.28.98

    This is a special range of IP Addresses reserved for ISPs to use in aggregating multiple customers onto a single IPv4 address.

    If FG was working for you previously and now has stopped then your ISP has change the connection on you.

    I would contact them and say:

    "I have a home security system that requires a TCP port forward. Can you change my connection to allow me to do IPv4 port forwards?"

    They may either do that. They may give you a range of ports you can use (report back and Ill show you how to use them). Or most likely they will say sorry we cant help.

    In the latter case your best bet is FGU or look at the Port Forward Alternatives thread.

  5. #725

  6. #726
    I tried for a few hours now to fix the problem and still can't figure it out. I made port forwarding for 1802, changed firewall preferences and I tried to find UPnP but couldn't find that anywhere on my router settings.

    1. IDK if you mean the IPv4 Address: 192.168.1.194
    2. Internal: 192.168.1.194 External: 97.168.1.194 (This is not my forte, sorry if these are the wrong values)
    3. Wired, but to a bouncer not the actual router.
    4. Set to Private.
    5. The AV is off, but I also added exceptions for FG and one specifically for 1802.
    6. Tracing route to dns.google [8.8.8.8]
    over a maximum of 30 hops:

    1 3 ms 5 ms 2 ms Linksys11557.Home [192.168.1.11]
    2 3 ms 2 ms 1 ms 192.168.0.1
    3 24 ms 21 ms 22 ms tukw-dsl-gw69.tukw.qwest.net [63.231.10.69]
    4 22 ms 21 ms 21 ms 63-226-198-33.tukw.qwest.net [63.226.198.33]
    5 22 ms 22 ms 21 ms sea-edge-15.inet.qwest.net [67.14.41.158]
    6 23 ms 23 ms 21 ms 72.14.221.108
    7 22 ms 24 ms 24 ms 108.170.233.129
    8 21 ms 22 ms 21 ms 142.251.55.199
    9 22 ms 21 ms 21 ms dns.google [8.8.8.8]

    7. I have added a port forward for 1802 TCP into my router.
    8. I'm not really sure what this is.

    I know this is fairly wishy washy for a bunch of answers, but hopefully it was the correct information you needed?

  7. #727
    damned's Avatar
    Join Date
    Mar 2011
    Location
    Australia
    Posts
    26,649
    Blog Entries
    1
    Welcome SP

    You need to forward TCP 1802 on your Router to the Repeaters WAN IP and from the repeater to your PCs IP.

    Also if you are using FG Unity you dont need to do this - just use the cloud connection.

  8. #728
    Sorry, how do I go about forwarding TCP 1802 to the repeaters IP and then to my PC's IP?

    And I am using FGC not unity.

  9. #729
    Zacchaeus's Avatar
    Join Date
    Dec 2014
    Location
    Scotland
    Posts
    20,737
    You’ll need to forward the port from the router to the repeater and then from the repeater to your computer. You’ll need to be able to access both from your computer. You’ll find the user manuals for both online usually and that will tell you how to access then and set port forwarding.
    If there is something that you would like to see in Fantasy Grounds that isn't currently part of the software or if there is something you think would improve a ruleset then add your idea here https://www.fantasygrounds.com/featu...rerequests.php

  10. #730

Thread Information

Users Browsing this Thread

There are currently 3 users browsing this thread. (0 members and 3 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Starfinder Playlist

Log in

Log in